How Should Dry Ice Be Stored and Transported Safely?
Dry ice is approximately -78.5 °C and changes directly into gas. Proper insulation, ventilation, and personal protection are essential for safe handling.
Key Facts About Storing Dry Ice
Dry ice is solid carbon dioxide and has a temperature of approximately -78.5 °C. Instead of melting, it sublimates directly into gas, so its quantity gradually decreases over time.
Insulated containers are commonly used to reduce heat transfer during storage and transport. However, dry ice should not be placed in a completely airtight, non-pressure-rated container because the carbon dioxide gas produced must be able to escape.
Dry ice should never be handled with bare hands. Its extremely low temperature can cause cold burns, so suitable protective gloves should be used.
Tinsagaz delivers dry ice across Türkiye using suitable packaging and transport conditions. After delivery, it should be stored in a well-ventilated area and, where possible, used close to the planned time of application.
Dry Ice Safety Rules
✓Use an insulated transport container
✓Do not place it in a fully sealed container
✓Keep it in a well-ventilated area
✓Wear protective gloves
✓Keep out of reach of children
Common Uses of Dry Ice
Cold-chain transport
Cooling food products
Transporting laboratory samples
Industrial dry ice cleaning
Event and visual effects applications
Temporary process cooling
What to Do After Receiving Dry Ice
1. Check the Packaging
Inspect the insulated container and do not seal it in a way that prevents gas from venting.
2. Wear Protective Gloves
Avoid direct contact with dry ice and use gloves that provide suitable thermal protection.
3. Move It to a Ventilated Area
Do not keep dry ice for extended periods in small, completely enclosed spaces.
4. Plan the Timing of Use
Because dry ice sublimates over time, use it as close as practical to the intended application.
Safety Note
The carbon dioxide released by dry ice can accumulate in enclosed spaces and reduce available oxygen. Adequate ventilation is therefore essential in vehicles, rooms, and storage areas.